SDVS301 intelligent optical feeding parts sorting controller is a general-purpose product for automatic material sorting applications. It integrates two optical fiber amplifiers, two air throttle valves, two sensor ports and two DC control output ports.

Based on optical fiber sensor recorded luminance differences between the feeding parts to be passed and to be rejected, the air stream generated by the air valve will blow off the abnormal material to achieve material sorting.

SDVS30 meets most two-stage sorting requirements. Compared with separated optical fiber amplifier and air valve sorting solutions, our innovative controller has obvious price/performance advantage.It can work in collaboration with our SDVC series vibratory feeder controllers in ways of power supply and signal input & output connections to form a total material feeding and sorting solution.

Feartures

1)Singel independent optical fiber amplifiers and dual air valves sortingsystem；

2)Sunlight and incandescent light immune optical fiber amplifiers；

3)Auto generated dual threshold values can eliminate the influence of background luminance；

4)Alarm signal output upon blow off failure；

5)Dual independent air flow volume adjustment；

6)Dual self-adapting NPN/PNP switch sensor interfaces；

7)Dual push-pull type 24V/400mA DC output；

8)Comprehensive protection functions including undervoltage, overvoltage, inverse wiring, overcurrent and short-circuit protections；

9)Parameter group quick switch；

10)Input-output matrix combination and complex logical relation setting；

11)Input-output timing sequence definable output mode selection；

12)Independent parameter reset functions help to avoid resetting all parameters；

13)Built-in air valve action counting function helps you evaluate the lifetime of the valves；

14)Dual anti-jamming capability allows two fibers to work together in close proximity；

15)The built-in ability to learn the distribution of material characteristics can significantly improve the reliability of feeding parts sorting.

Dimensions &Weight

1)Dimensions：212*56*94.4 (L*W*H,mm)

2)Weight：586g（without accessory）

Standard Accessories

1)24V Power Cable（1m）*1

2)Reflective Sensing Fiber（1m）*1

3)Output Air Tube（1m）*1

Optional Accessory

1)Fiber Mounting Bracket

2)Fiber Cutter

3)Focus Mirror

Technical Data

Note 1: If input power exceeds 30 V, display screen will go out to protect the controller. Max input voltage must not exceed 36 V.

Note 2: Do not connect to capacitive load.

Note 3: The digital photoelectric gain is defined as the product of the average power of the emitted light and the receiving sensitivity. Diameter of the optical sensor core is 0.5mm.

Note 4: Standby Power is the power consumption when the internal solenoid valves are not operating.

Note 5: The maximum air supply pressure must not exceed 10 Bar when the controller is not powered.

Note 6: Do not work under glare LED lighting.