The CUH SDVC20-L and SDVC21-LP 380V voltage controllers are designed for connecting to 380V or even up to 440V AC power supply. They are also equipped with all functions of SDVC 2 series controller.
Time Adjustable Soft Start:The controller will gently increase output voltage from 0 to the preset value when power on to avoid sudden shake. Soft start time can be digitally preset.
Fuse-Short Circuit Protection: If output of the controller is short-circuited, the fuse inside will be blown to protect the controller and the load.
Automatic Voltage Regulation: The internal digital voltage regulation circuit can reduce feed speed variation caused by mains voltage fluctuation.
Digital Overheat Protection: If internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Preset Speeds: 4 feed speeds can be preset, stored and outputted by connecting external short-circuit signals.
Switch Sensor ON/OFF Control:1 NPN switch sensors or PLCs can be connected to turn on/off the controller.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with ON/OFF Control of the controller to drive a solenoid or other external devices.
Type of Control Output: NPN type
Ingress Protection Level: IP67
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
Products Recommended
Please give us a message
3D VR Showroom